Mars Kids Electric ATV

Valued up to: $1223.96

$ 679.98 + Free Shipping!

Buy 2 or more at: $659.98 ea.

Instant Check Price: $652.78

Kids love these all-terrain electric ride-on 4-wheelers from Pure Fun World. They're built tough with a welded, high-tensile steel frame and a complete front and rear suspension. The Mars ATV even features real, off-road tires, disc brakes and reverse! The 350 Watt motor runs on two 12V batteries providing enough power for kids up to 165 pounds. The batteries charge in as little as 6 hours and can run up to 2 hours. The Mars 4-wheeler also features keyed ignition so parents are always in charge of riding time. The quad can also be limited to a low speed of 4 mph or a high speed of 9 mph (approximate). Working front headlights provide an added layer of safety. Comes in several colors.



  • Model: Pure Fun World Mars - E350Q-MA
  • Motor: 350W (Brush Motor)
  • Battery: 24v, 12Ah, 12V/2pcs (Lead-acid)
  • Transmission: Switched 2-Speed w/Reverse
  • Final Drive: Chain
  • Max speed: 2 settings, 4 mph low and 9 mph high (approx.)
  • Charge Time: 6 to 8 hours (approx.)
  • Run time: 2 hours depending on terrain and driver weight (aprox.)
  • Tires (front/rear): 4.1-6 / 4.1-6
  • Brakes (front/rear): NA / Disc
  • Features: Working Front Light, Durable Acrylic Body, Pneumatic Tires, High-tensile Steel Frame
  • Max load: 165 lbs.
  • Seat height: 19 inches
  • Wheelbase: 30 inches
  • Seat to Foot Pedal Distance: 12.5 inches
  • Net Weight: 97 lbs
  • Gross Weight: 130 lbs
  • Dimensions (LxWxH): 40x25x21 inches
  • Shipping Dimensions (LxWxH): 42x24x20 inches
  • Warranty: Limited 3 months, 6 months electronics


General Videos

Note: The products shown in these videos may not be identical to the product sold on this page. However, they contain general information that may prove helpful. Viewing them is highly recommended.

Product Notes:

Warning: The rear axle and motor are held by a metal brace during shipping. Before assembling, this brace needs to be removed and replaced with a shock. Do not let the motor axle assembly slip down further than is needed for shock installation. If dropped too far, the motor wires will pull loose from the motor and the power switch will not work. Once the shocks are installed, the motor will be held in place and no damage will occur.