Sonora Electric Kids ATV

Valued up to: $650.00

$ 499.98 + Free Shipping!

Buy 2 or more at: $469.98 ea.

Instant Check Price: $479.98

The Sonora electric ATV ride-on from Go-Bowen is built tough as nails just like a full-size four-wheeler, but it's sized perfectly for little riders! The Sonora frame is built from high-tensile steel and features a 350 watt, 24V brush motor that can power the quad up to 10 mph. It also includes disc brakes, a full front and rear suspension, off-road pneumatic tires and a sturdy acrylic body.

Safety comes from a keyed ignition that keeps kids from riding without permission. The key also operates a selectable speed control that lets parents choose between a low speed setting of 7 mph or high speed at 10 mph (approximate).

Sonora youth model electric quad comes in your choice of colors!

Video

Specifications

  • Model: Go-Bowen Sonora
  • Dimension (inches): 44x26x23
  • Seat height (inches): 19
  • Wheelbase (inches): 30
  • Seat to Foot Pedal Distance: 12.5 inches
  • Frame material: high-tensile steel
  • Working front light: Yes
  • Reverse: Yes
  • Motor: 350W (Brush Motor)
  • Max load: 165 lbs.
  • Battery: 24v 12Ah,12V/2pcs (Lead-acid)
  • Drive: chain drive
  • Max speed: 2 settings, 7mph low and 10mph high (approximate)
  • Deck: Acrylic
  • Charge time: 6 to 8 hours
  • Run time: Approximately 2 hours depending on terrain and driver weight
  • Tire size: 4.1-6
  • Brake: Disc
  • Packing Size (inches): 42x24x20
  • Gross Weight: 123lbs
  • Net Weight: 130lbs
  • Warranty: Limited 3 months, 6 months electronics

Support

General Videos


Note: The products shown in these videos may not be identical to the product sold on this page. However, they contain general information that may prove helpful. Viewing them is highly recommended.


Product Documents:


Product Notes:


Warning: The rear axle and motor are held by a metal brace during shipping. Before assembling, this brace needs to be removed and replaced with a shock. Do not let the motor axle assembly slip down further than is needed for shock installation. If dropped too far, the motor wires will pull loose from the motor and the power switch will not work. Once the shocks are installed, the motor will be held in place and no damage will occur.